Inquiry Basket (
Offer List
Circular Saw Blades for Tube Cutting
Circular saw blades made from HSS/Dmo5 and mainly HSS/Emo5 (alloyd with cobalt) are suitable for ...
[Expiration Date: 2010-10-10]
Carbide Tipped Drills
These are designed with a 118 Point and for use in hardened steel of up to 65 Rockwell C. Die Drills can be ...
[Expiration Date: 2010-06-09]
Laser Welded Diamond Saw Blades
Laser Welded Diamond Saw Blades
Welded Professional saw Blades
With "Key"slots(LS)-Manufactured
With G. ...
[Expiration Date: 2010-05-03]
HSS Slitting Saws - DIN 1838 B
Circular saw blades for metal DIN 1838 B with rough teeth and teeth form B are recommended especially for ...
[Expiration Date: 2010-10-10]
T Shot Cutters
The standard cutter ranges are manufactured in HSS, and HSCo
-High speed steel
-Intended for general ...
[Expiration Date: 2010-06-09]
Cylinder Milling Cutter
Cylindrical Cutters: Are manufactured from 6" dia to 8" dia & length from 16" to 20" in light & heavy duty. ...
[Expiration Date: 2010-06-09]
Micro End Mill
Micro End Mill
Small size End mill
HSS/HSSE/Carbide
From 1mm to 3mm
[Expiration Date: 2010-06-09]
3 Flute Countersink 90¡ãTapper Shank Din 335d
Three flute countersinks should be used at a slower (1/2 to 2/3 the speed used for drilling) speed. ...
[Expiration Date: 2010-06-09]
3 Flute Countersink 90¡ãStraight Shank Din 335c
Three flute countersinks should be used at a slower (1/2 to 2/3 the speed used for drilling) speed. ...
[Expiration Date: 2010-12-09]
3 Flute Countersink 60¡ãTaper Shank Din 334d
Three Flute Countersinks should be used at a slower (1/2 to 2/3 the speed used for drilling) speed. ...
[Expiration Date: 2010-06-09]
3 Flute Countersink 60¡ã Straight Shank Din 334c
Three Flute Countersinks should be used at a slower (1/2 to 2/3 the speed used for drilling) speed. ...
[Expiration Date: 2010-06-09]
DIN 1837 Slitting Saw
Ground/Milled Teeth
MATERIAL:
-HSS M2
-HSS CO5%(M35)
-HSS CO8%(M42)
SURFACE ...
[Expiration Date: 2010-03-30]
Ball Nose End Mill
-High speed steel/Caribe
-Intended for general workshop and production use
-Good chip clearance
-Range ...
[Expiration Date: 2010-10-10]
Carbide Tipped Hole Saw
Designed for sawing holes in abrasive materials such as fiberglass, particle board, asbestos board, cast ...
[Expiration Date: 2010-05-03]
Din842 Single Angle Cutters
Din842 Single Angle Cutters
HSS W9/M2/M35/M42
[Expiration Date: 2010-10-10]
Circular Saw Blades for Jewellery (Jewellery Saw)
These saw blades are made with hollow ground with flange and teethform A. The teeth pitch is finer than 1 ...
[Expiration Date: 2010-10-10]
HSS Slitting Saws - DIN 1838 C
The teeth consist of roughing teeth and finishing teeth. The roughing tooth is chamfered from both sides ...
[Expiration Date: 2010-10-10]
Roughing End Mill
Roughing End Mill
The standard cutter ranges are manufactured in HSS, and HSCo
-High speed ...
[Expiration Date: 2010-05-03]
Taper Shank End Mills
Taper Shank End Mills
The standard cutter ranges are manufactured in HSS, and HSCo
-High speed ...
[Expiration Date: 2010-05-03]
